Article ID : 00150393 / Last Modified : 12/03/2024Print

How to pair Bluetooth headphones with a Bluetooth source device

    Important! Read this before you start

     

    Pairing steps

    WF-SP700N, WF-1000X

    Select another model

    Step 1. Enter the headphones into pairing mode

    1. Place the headphones into the charging case.
    2. Remove the left unit from the charging case.
    3. Press and hold the button on the left unit for at least 7 seconds. The indicator flashes blue and red alternately. If you put on the headphones, you will hear a notification sound and the voice guidance saying Bluetooth pairing from the left unit.

      Note: If the pairing is not finished within 5 minutes, the pairing mode on the headphones is canceled. If this happens, place the headphones into the charging case again and start the operation from the beginning.

    Step 2. Operate a device and complete the pairing

    Select your source device from the following list to confirm the pairing procedure:

    Windows or MacOS computer.

    Other devices

    Note: Not all Sony Google/Android TVs can be used with Bluetooth headphones or speakers. Verify your TV supports Bluetooth using the article Can I use Bluetooth headphones, speakers, and soundbars with my Android TV or Google TV?

    Additional troubleshooting tips for Bluetooth connection to Windows laptop / computer

    Turn Bluetooth OFF and ON again

    Check your Bluetooth drivers

    Turn OFF Airplane mode (Windows 10)

    If the issue is not resolved

    If the issue is still not resolved, refer to the article Troubleshooting Bluetooth pairing issues.