Article ID : 00088176 / Last Modified : 24/06/2022Print

How to perform a power reset on a Sony television.

    Follow the steps below to perform a power reset.

    1. Turn off the television.

      IMPORTANT: For a projection television that uses an internal lamp, wait 5 minutes after turning off the television to allow the lamp to cool before continuing with the following steps.

    2. Unplug the television power cord (mains lead) from the electrical outlet.
    3. Let the television remain without power for 60 seconds.
    4. Plug the power cord (mains lead) back into the electrical outlet.

      NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.

    5. Turn on the television.

    NOTE: If the issue is not resolved, check the BRAVIA TV Troubleshooting Guide article.