If an unexpected symptom or those listed below appear while using your TV, the following procedure may help to improve the situation.
- Abnormal image, no picture, or no sound for a TV channel or external device
- No sound or distorted sound, unwanted noise, or interrupted sound when playing video or audio
- Video, pictures or thumbnails do not display properly, or display a black screen
- USB playback, Throw, or Screen Mirroring do not work
- The application does not operate correctly
Restart the TV.
NOTE: For more details, refer to the How to restart (reset) an Android TV/Google TV? article.
Remove any peripheral devices connected to the TV.
Turn off the TV and remove the power cord (mains lead) from the wall outlet.
NOTE: Wait approximately 2 minutes, and then plug the power cord back into the wall outlet and turn on the TV.
For Google TV except for X91J Series (85), the following alternative method has the same effect: On the TV, press the POWER button for about 40 seconds, or until the TV turns off.NOTES:
- If your BRAVIA TV is connect to an external HDD, remove it and try again.
- Leaving the TV with the power cord (mains lead) disconnected from the wall outlet allows any electricity that remains in the TV to be discharged. As a result, unnecessary data and error information in the memory will be cleared and allow you to use the TV again normally.
When the screen becomes black or the image is not displayed correctly in the HDMI/MHL connection, try the following methods to improve it:
NOTE: Your TV may not be compatible with an MHL connection. For details on your TV's specifications, refer to the manual.
- Disconnect and reconnect the HDMI/MHL cable.
- Disconnect and reconnect the power cord (mains lead) of the connected device, or reboot the device.
If you experience an abnormal image or sound, reset the picture or sound settings:
Software Update is an update program that adds new features and fixes bugs.
We recommend that you connect the BRAVIA TV to the Internet, and set Automatically check for update or Automatic Software Download to On so that updates will be automatically downloaded when the TV is in Standby. For more details, refer to the How to receive an automatic software update article.
NOTE for W8, X7 and X74H / X75H Series: These models always receive a software update automatically without any settings. For further information, refer to the How do I perform a Software (Firmware) update for my Android TV/Google TV? article.
- If you downloaded applications other than those pre-installed, those applications may be affecting the TV's operation. For details, refer to the Troubleshooting an Android TV or Google TV: How to know if a downloaded application is causing an issue, and how to resolve the problem article.
- If there is no improvement after performing a Restart operation or installing a Software Update, the problem may have another source. Please try searching for other FAQs.