IMPORTANT:
- The table-top stand must be removed before mounting your TV on the wall.
- There is a risk of personal injury. If the precautions listed in the wall-mount bracket installation instructions are not observed, serious injury or death through fire, electric shock, the product toppling over or the product dropping can result.
- Sony recommends hiring a licensed contractor to install the wall-mount bracket. However, when attempting to install the wall-mount bracket yourself, refer to the wall-mount bracket instructions supplied with your TV for detailed information.
Select your model/series and follow the instructions to remove/detach the table-top stand.
- The procedure differs depending on the TV model/series. You may refer to “How to find your model name” to find out your TV model/series.
- For TV models that are not listed below, refer to the Startup Guide/Operating Instructions and follow the steps on attaching the TV stand in reverse order to detach the stand.
![]()
For W880K, W870K, W830K, W830L, W820K series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV and detach the stand from the TV
For X64L, X74K, X74L, X75K, X75L series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV and detach the stand from the TV
For A80K, A80L, X80J, X80K, X80L,X85J, X85K, X85L, X90J, X90K, X90L series
For A90J, A90K, A95K, A95L, X95J, X95K, X95L, Z9J, Z9K series
- With the TV being held by one or more people, remove the screws that hold the Table-Top Stand to the TV and detach the stand from the TV.
NOTES:
- As you detach the Table-Top Stand, be careful when lifting the TV because the Table-Top Stand may topple over and cause injury or damage to the TV and the surface that the TV is sitting on.
- Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
- Be sure the TV is vertical before turning it on. Turning the TV on with the LCD panel facing down could cause uneven picture uniformity.
- When reattaching the Table-Top Stand, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.
For X90H, X95H series
1. With the TV being held by one or more people, pull out the Table-Top Stand from the TV.
Note: The image below is an example.
For X8500F series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV and detach the stand from the TV
For X7500F series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV and detach the stand from the TV
For KD-xxA1 series
KD-xxA1 series TV stand cannot be removed. For more information on how to do wall mounting, refer to the Startup Guide under the Manuals sections.
For X7000E series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV.
3. Detach the stand from the TV.
For X8500D series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV.
3. Detach the stand from the TV.
For W800C/X8000C series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV.
3. Detach the stand from the TV.
For KLV-xxR562C, KLV-xxR552C, KLV-xxR512C, KLV-xxR502C, KLV-xxR412C series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV.
3. Detach the stand from the TV.
For KDL-xxR550A, KDL-xxR520A series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV and detach the stand from the TV
For KDL-xxEX720, KDL-xxEX520, KDL-xxCX520, KDL-xxEX420 series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV.
3. Detach the stand from the TV.
For KDL-xxEX710, KDL-xxEX700 series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV.
3. Detach the stand from the TV.
For KDL-xxHX750, KDL-xxEX650, KDL-xxEX550 series
1. Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
2. Remove the screws that hold the Table-Top Stand to the TV.
3. Detach the stand from the TV.
