About the Charge / Bluetooth indicators on the Wireless Speakers
IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.
Indicators tell you the status of your wireless speaker, whether is it fully charged, battery running low, or being connected to a Bluetooth device.
Here is a list of what the Charge / Bluetooth indicators mean
CHG (CHARGE) indicator
Examples on the location
Meaning of the indicator
Action | Meaning | Applicable models |
---|---|---|
Turns off | The speaker has completed charging | SRS-XB models |
Lights up | The speaker is being charged | SRS-XB models |
Flashes slowly | The built-in battery is running low and needs to be charged | SRS-XB models |
Flash quickly |
An abnormality of the built-in battery has been detected Stop charging immediately | SRS-XB12 |
Flash 3 times and turn off | If the CHG (Charge) indicator flashes 3 times and goes off when you turn on the speaker, the built-in battery is empty and needs to be charged | SRS-XB12 SRS-XB01 SRS-XB22/XB32 SRS-XB21/XB31/XB41 SRS-XB20/XB30/XB40 |
BLUETOOTH indicator
Examples on the location
Meaning of the indicator
Action | Meaning | Applicable models |
---|---|---|
Lights up | The speaker is connected to a BLUETOOTH device | SRS-XB models |
Flashes quickly (3 times a second) | The speaker enters the pairing mode | SRS-XB models |
Flashes slowly | The speaker is searching for a BLUETOOTH device to connect with | SRS-XB models |
Flashes once | Each time you press the –/+ (volume) button, the indicator flashes once | SRS-XB10 SRS-XB12 SRS-XB01 |
Flashes 3 times | When you operate the –/+ (volume) button and the volume is set at the lowest or highest level, the indicator flashes 3 times | SRS-XB10 SRS-XB12 SRS-XB01 |
Flashes 3 times | The software has completed updating | SRS-XB22/XB32 SRS-XB21/XB31/XB41 |