Sony Support

DPP-FP55 Firmware Update for Bluetooth USB Adaptor (DPPA-BT1) and SDHC Memory Card

    Applicable Models
    About this download
    File Info
    System requirements
    Download
    Install

    Applicable Models

    This information is for the following models:
    • DPP-FP55

    About this download

    Sony now provides a firmware update file to upgrade the DPP-FP55 digital photo printer to support the Bluetooth USB adaptor (DPPA-BT1) and the SDHC* Memory Card.

    This firmware upgrade allows you to use the DPP-FP55 digital photo printer with the optional Bluetooth USB adaptor (DPPA-BT1) attached to make a wireless printing of an image from a Bluetooth-compliant mobile phone, digital camera, or other device. It also enables the printer to read and print an image of the SDHC Memory Card.

    *SDHC(SD High Capacity) card is the new SD memory card based on the SDA 2.00 specification, introduced by the SD Card Association.
    This new SDA 2.00 specification enables SD cards to reach higher capacities - over 2GB.
    For more details, please see the website of SD Card Association or SDHC memory card manufacturers.


    Applicable Models:

    Sony DPP-FP55 digital photo printers with the following serial numbers: 1000001 ～ 2000000

    Supported Operating Systems:

    • Windows® XP Professional
    • Windows® XP Home Edition
    • Windows® 2000 Professional
    • Windows® Millennium Edition

    Operating conditions:

    • The computer should be equipped with either a "Memory Stick" slot or an SD card slot, or a USB port.
    • The RAM should be 32 MB or more.
    • Available hard disk space should be 5 MB or more.

    Other items to be prepared:

    • Memory Stick or SD card formatted with the digital camera.
    • A digital camera
      If the computer is not equipped with either a Memory Stick slot or an SD card slot, please prepare the USB cable supplied with the digital camera to be used.

    Available Download:
    Filename: DPP55V2.exe
    Download size: 2.08 MB (2,186,817 bytes)
    Originally posted: 2006/09/11

    File Info

    File Name

    • DPP-FP55 Firmware Update for Bluetooth USB Adaptor (DPPA-BT1) and SDHC Memory Card

    File Version

    • 2

    File Size

    • 2.08MB

    Release Date

    • 2006-09-18

    System Requirements

    • Windows XP
    • Windows 2000
    • Windows ME

    Download

    Note:

    • During the update, please ensure that the printer and the AC adaptor are placed in a stable location so that the AC adaptor may not be removed and the printer is not turned off. If the power runs out during the update, the printer may be inoperable.
    • Do not use this firmware to update any other models.
    • It is highly recommended to print out these instructions as a reference during the installation process.

    Install

    Details

    Download and Installation Instructions

    1. To ensure that no other program interferes with the installation, save all work and close all other programs.

    2. Download the DPP55V2.exe [ File size 2.08 MB (2,186,817bytes) ] to a temporary or download directory (please note this directory for reference).

    3. Go to the directory where the file was downloaded and double-click the DPP55V2.exe file to extract it.

    4. DPP55V2.vup should be created by extracting the file.

      *Depending on the operating system settings, the file may be automatically extracted when it is downloaded.

    5. Please follow the steps in Firmware Updating Instructions to update the firmware in Digital Photo Printer DPP-FP55.