Windows 7 Compatibility Chart For MICROMV Camcorder

The following tables show you the result of compatibility tests of each product with Windows 7.
About the applicable environments:

• Windows 7 needs to be preinstalled at the factory.
• Environments upgraded from other OS are not supported.
• Operations are not guaranteed in all computers.

Note: 

• The USB streaming function is not supported unless otherwise specified.
• i.LINK connectivity is tested with Windows Movie Maker.

Legend:
O : Compatible
X : Not compatible
- : Not applicable

	USB (Memory Stick)		i.LINK
Model	64-bit	32-bit	64-bit	32-bit
DCR-IP1/E	O	O	O*8	O*8
DCR-IP210/E	O	O	O*8	O*8
DCR-IP220/E	O	O	O*8	O*8
DCR-IP45/E	O	O	O*8	O*8
DCR-IP5/E	-	-	O*8	O*8
DCR-IP55/E	O	O	O*8	O*8
DCR-IP7/E/BT	X	X	O*8	O*8

*8 The supplied software (MovieShaker Ver.3.1 for MICROMV) is not compatible with Windows 7.
When using Movie Maker,
- You cannot write back to a tape.
- 16:9 scenes will be 4:3 (vertically stretched).
- You cannot partly import movies from a tape (only entire movies can be imported).

 

The following table shows you the result of compatibility tests of each software with Windows 7. About the applicable environments:

• Windows 7 needs to be preinstalled at the factory.
• Environments upgraded from other OS are not supported.
• Operations are not guaranteed in all computers.

Note:

• Starter Edition of Windows 7 is not supported unless otherwise specified.
• With 64-bit editions, the software works in the 32-bit compatibility mode.

Software	Compatibility
	64-bit	32-bit
MovieShaker Ver.3.1 for MICROMV	No

Last Updated 14th October 2009