Sony SupportDHC-AZ55D

Article ID : 00229412 / Last Modified : 20/04/2020

Follow the steps below to check the status of the speaker’s BLUETOOTH indicator.

    1. Delete the Bluetooth device information of your playback device.

      The method of operation varies depending on the playback device. For details, see the following.
      How to delete the Bluetooth device information of your playback device

      If the speaker type isn’t listed in the Bluetooth device information on the playback device, proceed to step 2.

    2. Initialize the speaker.

      With the speaker turned on, press the – (volume) button while the speaker is on and press and hold the  (power) /  PAIRING button for more than 5 seconds. The power will turn off when initialization is complete.

      NOTES:
      • Initializing the speaker resets the volume control, etc. to factory settings and deletes all pairing (device registration) information.
      • As the location of the buttons on the speaker varies depending on the product, please see the instruction manual included for details.

      Example for SRS-XB22

      Image indicating SRS-XB22 volume and power/PAIRING button

      Example for SRS-XB12
      Image indicating SRS-XB12 volume and power/PAIRING button
       

    3. Turn the speaker on and check the status of the Bluetooth indicator.

      Example for SRS-XB22
      Image indicating SRS-XB22 Bluetooth indicator

      Example for SRS-XB12
      Image indicating SRS-XB12 Bluetooth indicator
       

    • Flashes slowly / Lights up

      Initialization is not possible and the power is on. Initialize the speaker again.

    • Flashes quickly (3 times a second)

      The speaker is in pairing state.

     

     

    Back to Main Menu