Article ID : 00245437 / Last Modified : 01/05/2020

How to change table top stand height and position after set up

    Please proceed with following method.
    NOTE: This operation will need 3 or more people.

    Choose your TV series:

    A8H, X95H (55, 65, 75)

    1. Pull out the Stand from the TV
      NOTE: The image below is an example.
    2. In order to attach the Stand safely, put suitable hardness material under the TV, for example old newspaper or magazine. To reduce the risk of the TV falling, make sure the TV is held by one or more people.
      The appropriate material size to put under the TV. A: Width, B: Height, C: Depth
      (Unit = cm)
      TV model series nameABC
      A8H series40~60Approx. 20More than 20
      X95H (55, 65, 75) series40~60Approx. 25More than 20
    3. Attach the stands using the guides below.
      NOTE: These guides are for reference. For more information, refer to the Setup Guide included with your TV.
      Choose your model:

      • For A8H

      • For X95H (55, 65, 75)


    Z8H series

    1. Detach the table top stand from the TV.
    2. In order to attach the Stand safely, put suitable hardness material under the TV, for example old newspaper or magazine. To reduce the risk of the TV falling, make sure the TV is held by one or more people.
      The appropriate material size to put under the TV. A: Width, B: Height, C: Depth
      (Unit = cm)
      TV model series nameABC
      Z8H series40~60Approx. 2More than 20
    3. Attach the stand referring to the guide below.
      NOTE: This guide is for reference. For more information, refer to the Setup Guide included with your TV.