Article ID : 00226319 / Last Modified : 28/03/2019

How to program your TV remote to control your Set Top Box?

    You can program the TV remote to enjoy the functionality of controlling your TV and Set Top Box(STB) simultaneously. 

    To setup

    1. Press and hold the STB button, then press the corresponding code while still holding the STB button. 
      tv stb

      For the corresponding code, please refer to below table
      ManufacturerCode
      Dish TV0101, 0102, 0103, 0104, 0105, 0106, 0107
      VideoCon0201, 0202, 0203, 0204, 0205, 0206, 0207
      Airtel0301, 0302
      Hathw@y0401, 0402, 0403, 0404, 0405, 0406, 0407
      TATA Sky0501, 0502, 0503
      DEN0601, 0602, 0603, 0604, 0605, 0606, 0607
      Siti Digital0701, 0702
      GTPL0801, 0802, 0803
      Reliance0901, 0902, 0903, 0904, 0905, 0906
      Sun Direct1001, 1002, 1003, 1004
      Digicable1101, 1102, 1103
      InDigital1201, 1202, 1203, 1204, 1205, 1206

       
    2. Release the STB button when done. 
      - If successful, the STB button LED will turn RED and blink twice. 
      - If unsuccessful, the STB button LED will turn RED and blink quickly 5 times. Please re-try from step 1 again.

    To enjoy usage

    1. Select TV or STB Mode by pressing the TV or STB button.
      tv with stb
       
    2. When in STB Mode, TV button will not function (and vice versa).
      Do note that TV Power, STB Power, TV Input, YouTube and NETFLIX buttons will always function in both modes.