MRP
Rs. 19,990
(incl. of all taxes)Full Specifications and Features
Size & Weight
- Dimensions (W x H x D)
- 344 mm x 78 mm x 250 mm
- Weight
- 4.86 kg
Speaker System
- Configuration
- DVC
- Size
- 20 cm (8)
General Features
- Effective Frequency Range
- 20 Hz–200 Hz
- Impedance (ohms)
- 2-ohms + 2-ohms
- Diaphragm Material
- Paper
- Magnet Material
- Ferrite
- Surround Material
- Rubber
Built-in Amplifier
- Low Pass Filter
- 50 Hz–150 Hz
- Low-Pass Filter Slope
- 12 dB/oct
- Rated Output Power/THD (14.4 V, 20 Hz – 20 kHz) At 2 Ohms
- 75 W/1.0%
- Maximum Output Power (14.4 V) At 2 Ohms
- 160 W
What's In The Box
- Level Remote
- Mounting Brackets
Features
Ultra-sleek, shallow subwoofer
No space for a big subwoofer enclosure? At only 7.8 cm (3 1/8) deep, the XS-AW8 powered subwoofer fits in tight spaces in your vehicle for powerful bass sound throughout the car.
Optimally designed driver unit and low-resonance cast-aluminium enclosure
To reproduce powerful bass sound from its compact dimensions, the slim enclosure is paired with a unique rigid subwoofer diaphragm. The built-in amplifier also integrates a sturdy heat-sink to protect the driver unit and amp without introducing unwanted vibrations and harmonic distortion.
Supplied wired remote commander
A supplied wired remote commander allows you to adjust the subwoofer volume from the driver's seat.
160 W peak (75 W RMS) output power
Fill your car with 160 W (75 W RMS) of clean, dynamic bass sound with our original power IC. The matched class A/B amp is designed for high power and natural, distortion-free sound even at high output levels.
High-level input/Audio-line input
What if you're using a factory radio that doesn't have pre-amp outputs? Simply connect the speaker outputs of your receiver to the high-level inputs. When pre-out audio signals are available from the receiver, connect them to the CH1(R) and CH2(L) terminals. Compatibility with up to 5 V pre-outs means you can utilise higher-voltage audio input for a clean audio signal and less external noise.
Single-sided controls and terminals
Connections and amplifier controls are together on the same side for easy installation and tuning. The amplifier features a variable low-pass filter for simple connection to full-range sources, including the speaker-level inputs. A switch additionally allows you to customise the subwoofer phase output, to prevent any reduced bass response due to phase cancellation from other speakers in your system.