Article ID : S500022982 / Last Modified : 11/04/2018

How to set up the system for 3D display?

Applicable Products and Categories of This Article

To set up the system for 3D display:

  1. Press the MENU button on the head mounted unit.
  2. Press the Imagebutton to select the Image 3D Setting menu, and then press the MENU button.
  3. Press again the Imagebutton to select the 3D Display setting, and then press the MENU button.
  4. Manually select the display format for 3D content.
    Available settings vary depending on whether the source signal includes a 3D format identification signal, as follows.

    Over-Under: Select for top-and-bottom 3D content, with similar images displayed on top and bottom.
    Side-by-Side: Select for side-by-side 3D content, with similar images displayed side by side.
    Off: Select to display content in 2D format


Note:
After viewing 3D content, change the setting to Off from Over-Under or Side-by-Side.