Article ID : 00152819 / Last Modified : 11/04/2018

What is the pairing procedure?

Applicable Products and Categories of This Article

Pairing Procedure:
  1. Turn ON the system.
  2. Set the Bluetooth function of the Bluetooth device to on.
  3. Press and hold the PAIRING button on the system until the Bluetooth indicator (blue) begins to flash quickly. *1
  4. Perform the pairing procedure on the Bluetooth device to detect the system. *2
  5. Select SRS-BTD70 shown in the display of the Bluetooth device. *3, *4
  6. If Passcode input is required on the display of the Bluetooth device, input 0000. *5
  7. The Bluetooth connection is completed and the Bluetooth indicator (blue) on the system stays on.


*1: Pairing mode of the system is cancelled after about 5 minutes, and the Bluetooth indicator (blue) turns off.
If the pairing mode is cancelled while performing this procedure, start over from step 3.
*2: For details, refer to the operating instructions supplied with the device.
*3: Some devices cannot display a list of detected devices.
*4: If SRS-BTD70 does not appear on the device’s display, repeat from step 2.
*5: Passcode may be called Passkey, PIN code, PIN number, or Password.